GST is NOT applicable on the sale of this item - Further information, please call Steve - 0437-538-789

GST is NOT applicable on the sale of this item - Further information, please call Steve - 0437-538-789

GST is NOT applicable on the sale of this item Starts, Runs and operates Hydraulic leak Further information, please call Steve - 0437-538-789

GST is NOT applicable on the sale of this item Starts, runs, and operates Rough Unit Further information, please call Steve - 0437-538-789

GST is NOT applicable on the sale of this item Further information, please call Steve - 0437-538-789

GST is NOT applicable on the sale of this item Rough Unit Starts & runs Further information, please call Steve - 0437-538-789

GST is NOT applicable on the sale of this item

**Finance Company Repossession** no decals starts and operates, missing front windscreen, door only opens from inside, some rust in body. 1 x extra bucket.

GST is NOT applicable on the sale of this item - Rebuilt Motor at 7136 hours - Current Hours on Motor Circa 838 Hours - Hammer Piping - Everdigm Hitch - Dig Bucket with Side Cutters - Hydraulic Grab - Sieve Bucket - Demo Guard - Handrails - Emergency Stop - UHF - Broken Drive Motor – Front Left-Hand Side - Inspection Recommended

GST is NOT applicable on the sale of this item Further Information, please call Steve - 0437-538-789

***BOTH RUBBER TRACKS DAMAGED*** -Operable but require repair/replacing - DOM not showing - L 6.8m W 2.5m H 3.4m

GST is NOT applicable on the sale of this item Further information, please call Steve - 0437-538-789

GST is NOT applicable on the sale of this item Further information, please call Steve - 0437-538-789

GST is NOT applicable on the sale of this item Further information, please call Steve - 0437-538-789

Travel L 7.2m W 2.5m H 4.2m ***DRIVE COGS WORN - VERY LOOSE TRACKS*** ***Can only be driven short distance onto purchasers truck*** No service history, windscreen smashed, push button start - has grabber attached, no buckets, bent cab and grab rails - engine stars & runs

***UNKNOWN MECHANICAL FAULTS - REQUIRE DIAGNOSTIC/REPAIRS*** ***Machines walk, slew and can raise arm for transport*** ***Drive sprocket on LHS not fully operational - key shutdown not operational, use choke*** NO DOM showing - L 9.2m W 3.4m H 5.0m

GST is NOT applicable on the sale of this item a/c cab**seat mounted controls**rops/fops**front blade**swivel quick hitch**auxiliary hydraulics**mud bucket**ripper**fork attachments**

Slew requires attention

***UNKNOWN MECHANICAL FAULTS - REQUIRE DIAGNOSTIC/REPAIRS*** ***Machines walk, slew and can raise arm for transport*** No DOM showing. L 11.0m W 3.2m H 5.0m

hydraulic quick hitch. 300mm and 1m buckets

GST is NOT applicable on the sale of this item starts and drives, comes with attachments

**NO DOM SHOWING *** Cones with 3x buckets in total, widths are 122cm, 58cm & 27cm. Overall dimensions L 5.0m W 1.9m H 2.6m

GST is NOT applicable on the sale of this item Cat 928H loader.

Starts and drives, has some rust on cab.

L 5.9m W 2.0m H 3.2m Bucket zw 202cm Depth 77cm H 1.0m

GST is NOT applicable on the sale of this item L 6.4m W 2.7m H 3.5m Bucket W 270cm Depth 1.1m H 80cm. **NO DOM, passenger windows is missing.

• Machine has power • Starts and runs • Rear diff requires attention

Aprx total dimensions: height 2.2m, width 1.5m, length 3.3m

Dumper Hydraulic Track with Rotating Dumper DR1200 Track Dumper is compact and convenient, this versatile machine is engineered specifically for building sites, roads, nurseries, and all scenarios where maneuvering small to medium quantities of material in tight spaces is essential making it a must-have tool. Dumper has forward unloading, rotary unloading, side-turning unloading making it convenient and easy to use, ideal for many uses. • Diesel engine • Operating weight 850kg • Loading capacity 1000kg • Overall length 2500mm with foot rest • Overall width 900mm • Overall height 1400mm • Rotation angle 260 degrees • Tipper angle 90 degrees • Heavy duty tracks Hydraulic controls

GST is NOT applicable on the sale of this item Overall L 5m W 2.4m H 3.2m - comes with solid & 4-in-1 bucket

GST is NOT applicable on the sale of this item Further information, please call Steve - 0437-538-789

starts and drives

GST is NOT applicable on the sale of this item Sakai GW750 multi wheel vibrating roller.Fold down rops.Isuzu engine. water sprayer.

Roller width 2.13m

Roller width 2.13m

Roller Width 2.13m

GST is NOT applicable on the sale of this item Low hours 64 Further information, please call Steve - 0437-538-789

GST is NOT applicable on the sale of this item - Condition Unknown - For further information, please call Steve 0437-538-789

Roller Width 1320mm

GST is NOT applicable on the sale of this item - Right rear Tyre, flat - Starts & runs - Further information, please call Steve - 0437-538-789

GST is NOT applicable on the sale of this item Further information, please call Steve - 0437-538-789 New unit never Used on job site

No key

Hrs showing: 5670 * starts drives. * new computer recently installed (May 2025)*

GST is NOT applicable on the sale of this item

Starts and drives, L5.4m, W2.9m,

GST is NOT applicable on the sale of this item

- 3 Part Boom - Running Rope

GST is NOT applicable on the sale of this item **11 months crane certification**reconditioned engine fitted 08/24**reco engine less than 100hrs use**

Machine has power, starts and runs but will require work to get started as the machine has been stood down for some time.

L 5.5m W 2.5m H 4m

L 5.5m W 2.5m H 4m

GST is NOT applicable on the sale of this item

Starts drives, mast/spreader removed for transport. Steering columb cover broken

2019 Diesel forklift. side shift. adjustable forks. container mast.

3 stage container mast, 167 hours showing, plus 1611 hits. Total 1,778 hrs

Mechanical and electrical condition unknown.

Mechanical and electrical condition unknown.

Enclosed Cab, ROPS, 2 Stage Mast, Tyne Adjust, Side shift & Tilt. Requires Jump. NOTE: Corrosion Evident. Said to run rough due to hydraulic pump issue. Darwin; NT

Enclosed Cab, ROPS, 2 Stage Mast, Side shift & Tilt. Requires Jump. NOTE: Corrosion Evident. Darwin; NT

SWL 2000kg@600mm, plated Max lift height 6.845m, transport height approx 3m *Notes from vendor - Reach cylinder has a leak and needs replacing, carriage bearings and rollers to be assessed while carriage is out replacing cylinder. *Bought as a fully refurbished unit late 2023 direct from Crown.

SWL 1360kg @ 610mm load centre @ 4.95m lift, 910kg @ 610mm @ 6.09m plated Max reach, last service sticker indicates 4/2024 @ 3323 hours *In working order, due for comprehensive service.

Side loading fork in average conditions for its age & hrs. No LPG bottle so doesnt start, did start and run when arrived but now out of gas

leaking hydraulic oil from one of the rams

Charger Supplied

• BT50 XTR 4WD • 3.2 L 5 Cyl Turbo Diesel • Manual • 138k Kilometres • 1 owner • Full logbook service history • Secondary fuel filter • Bullbar • Towbar • Sidesteps • Sports Bar • Spotlights

Tailshaft removed.Turns over,no start.

*Non Runner*

GST is NOT applicable on the sale of this item Ingersoll rand compressor. Spray bar. Hose reels. Storage cupboards.

L 5.6m W 2.5m H 3.3m (The EWP has the following • 21m reach • Extendable outriggers – Max width 4.2m • Operator Manual available • Emergency recovery • Extra Large Platform - 1900mm x 3800mm x 1000mm • Platform Capacity: o 250kg – 10m reach o 500kg – 9m reach o 1000 kg – 8m reach ) (Note: Please see attachments for more details on range and specs)

GST is NOT applicable on the sale of this item Mitsubishi twin cab tipper. Remote control. Side lifter.7 seater. New tyres.

GST is NOT applicable on the sale of this item Isuzu NPR 3.9L turbo. Flocon body. New front tyres. New batteries. Recent service.

comes with trailer

Cannot locate compliance plate. Comes with machine

**Unused - New in Crate** Unused 2024 KOBOLT Zero Turn Mower Description: Cutting Width: 62” Power: - 24hp Loncin Petrol 4 Stroke Engine - V-twin cylinder, 802cc - Engine Oil Capacity 2.4L Drive: - Dual hydro static drive - Infinitely variable Max. Cutting Speed: 19km/hr Cutting Styles: - Finishing - Optional mulching blades Cutting Blades: 3 Fuel Tank: 28L Start: Electric Cut Height: - Adjustable - 38mm to 127mm Blade Engagement: Manual Clutch Deck: 7-guage fabricated steel ROP: Yes Wheels: - 22” x 10” rear tires - 15” x 6” front tires Weight: 500kg Dimensions: - 2.08x1.91x1.75m (Crate)

**Unused - New in Crate** Max. Cutting Speed: - 16 km/hr Cutting Styles: - Finishing - Optional mulching blades Cutting Blades: 3 Fuel Tank: 15L Start: Electric Cut Height: - Adjustable - 38mm to 127mm (1.5” to 5”) Blade Engagement: - Manual Clutch Deck: - 12 gauge stamped steel ROP: Yes Wheels: - 20” x 8” rear tires - 13” x 5” front tires Weight: 410kg Dimensions: - 1.91x1.37x1.83m

*RCM Fault**Drives*

Requires attention

**34,500kg atm**2"pin**ringfeder**spare wheel hanger**spring suspension**

Overall dimensions: 7450mm · Wide: 2150mm · Height from ground: 2550 · Window Openings: 2 x 940h x1600L , 1 x 940h x1540L lift up service windows · Draw bar length: 1700mm · Draw bar size 100x50x4mm · Tow hitch 2000kg Suspension · Heavy duty roller rocker suspension · Tandem axle 40 x 40 solid axle · Tyres 185/R14 with steel painted rims Trailer · Tare weight: 1500kg with equipment · ATM: 2000kg · Chequer plate protection on the front and sides · 4 x heavy duty stabilizer legs · Chassis and frame: galvanised steel · Brakes override mechanical brakes system · Body fibreglass panels with thermal insulation · Three lift up service windows · Rear door with lock · Porch 2100 x 2050 with stainless steel rails enclosure and 2 x entry gates each side and chequer plate finish Electrical · Led tail lights · 2 x led lights internal · Fully wired with circuit board (to be test by qualified electrician) Equipment Equipment and Internal fit out · Water system: 2 x30L water tanks, 20L waste tank · Double bowl sink with hot and cold water and additional sink hand wash or rinsing sink with hot and cold water . · Stainless steel bench tops · Freezer & Fridge under bench type 2 door with stainless steel top · Double Fryer 12L Electric · Hot plate 730mm · Exhaust range hood stainless steel 2400mm · Cash draws x 2 · Steps portable · 2 x Gas Bottle Holders · Heavy Duty Jockey wheel

starts and drives

Dual Perkins Turbo Diesel Engines with Olympian 200KVa Altenators, 13 ,500L water tank & 5,500L diesel tank, Mounted on custom made skid. Synk panel to run both generatos at the same time listed

Mobile Shower/bathroom & Toilet, 2 x 14,000 Potable , 4,400L Fuel Pod, Mounted on custom made skid.

- Single Phase, ex Telstra

Requires new Turbo,consumes oil. last meter reading 14984hrs

Mechanical and electrical condition unknown.

BC1200XL Woodchipper - 04/2014 - 3468 Hours - Pintle Hitch - ATM 3266kg - TARE 2175kg - Wheel Rim Size 16" - Tyre Size LT 285/75R16 - 430mm Feed Opening - Swivel Discharge Chute - 4 Cylinder Diesel Engine - Working Condition - Belt & Infeed Drive Motor wear evident

GST is NOT applicable on the sale of this item aprx top pin dimensions: 340mm DBE, 80mm pin diameter, 450mm C2C, aprx bottom pin dimensions: 250mm DBE, 60mm pin diameter, 380mm C2C, fits 14T / 20T excavator

500kVA 22,000V/440V Dyn 1 ABB Transformer

3 Phase, 3500kVA, 22000 Volts transformer. Electrical condition unknown.

4.3kva

last recorded hrs 7959

6 x 63 AMP Outlets, 2 x Three Phase Outlets. Made to join both Ablution Skids

Mechanical condition unknown.

Working Width : 1600mm Blade Qty : 48pcs ,6pcs in one circle Type of blade : Working way : Rotary PTO speed : 540r/min Power （HP）：40-60HP Size (L*W*H)mm : 1675*908*995

L 7m

No Comp Plate

Flow meter & Hose

Miscellaneous used machinery attachments. Mechanical condition unknown.

excavator bucket

Mechanical condition unknown.

2.9m Length Bunk, 2.4m Stake.

GST is NOT applicable on the sale of this item caterpillar 3406 block and cylinder head.

GST is NOT applicable on the sale of this item caterpillar 34098 block and sump.

GST is NOT applicable on the sale of this item new 3406b crankshaft and engine block.

Suits Bobcat

2.5m long x 410mm width

• Cutting Width: 1800mm • Blade Quantity: 3 • Wheel Quantity: 4 • Working Method: Rotary • PTO Speed: 540r/min • Power: 40-70HP • Dimensions (L*W*H): 1890*1345*670 mm • Weight: 220kg • PTO shaft included

Mechanical and electrical condition unknown.

Mechanical and electrical condition unknown.

Mechanical and electrical condition unknown.

unknown mechanical condition

suits 3.5t Excavator. pin to.pin 200mm,ear to Ear 140mm,pin diameter 40mm

x2 Wheels & Tyres

x3 Wheels & Tyres

x3 Wheels & Tyres